Night Vision 2mp WDR MIPI 1080p Camera Module With Sony IMX290 Sensor
2mp 1080p Wdr Mipi Camera Module Sony Imx290 Sensor
1080p Wdr mipi camera module
This is a Full HD mipi USB camera module with SONY sensor IMX290. The IMX290 is a 6.46 mm diagonal (Type 1/2.8) CMOS active pixel solid-state image sensor with a square pixel array and 2.13 M effective pixels.
This is a low-light starlight USB camera module with WDR function, which can take very good picture quality in low-light environment. Can be applied to surveillance cameras, FA cameras, industrial cameras, etc.
Specification:SONY IMX290 camera module
| Model No | SNS-21610-V1.0 |
| Sensor | 1/2.8’’ SONY IMX290 CMOS |
| Pixel | 2 Mega Pixel |
| Most effective pixels | 1920(H) x 1080(V) |
| Pixel Size | 2.9µm x 2.9µm |
| Image area | 1937(H) x 1097(V) |
| Compression format | MJPEG / YUV2/H.264 |
| Resolution & Frame rate | 1920 x1080 @ 60fps 1280x960 @60fps 1280x720 @ 60fps 800x600 @ 60fps 640x480 @ 60 fps 320x240 @ 60fps |
| Shutter Type | Electronic rolling shutter |
| Focus type | Fixed focus/Manually adjustable |
| S/N ratio | 52dB |
| Dynamic range | 72dB |
| Sensitivity | 7757 mV / lux-sec |
| Interface type | USB2.0 and SPI |
| Adjustable parameter | Brightness |
| Lens | Optical length: 18.6mm |
| | F/NO: 2.4 |
| | FOV: D=120° |
| | Thread Size: M12*P0.5 |
| Audio frequency | Optional |
| Power supply | USB BUS POWER |
| Power consumption | DC 5V, 260mW |
| Main chip | DSP/SENSOR/FLASH |
| Auto Exposure Control (AEC) | NOT Support |
| Auto White Balance (AEB) | NOT Support |
| Auto Gain Control (AGC) | NOT Support |
| Dimension | 38mm x 38mm |
| Storage temperature | -20°C to 70°C |
| Operating temperature | 0°C to 60°C |
| USB cable length | Default |
| Support OS | WinXP/Vista/Win7/Win8/Win10
Linux with UVC(above linux-2.6.26)
MAC-OS X 10.4.8 or later
Android 4.0 or above with UVC |
Shenzhen Sinoseen Technology Co.,Ltd
China top 10 camera module manufacturer
We customize all kinds of USB/MIPI/DVP camera module as per your request
FAQ:
Q1. How to choose the right camera module?
A: Please tell us your specific needs, such as application scenarios, resolution, size, and lens requirements. We will have a professional team of engineers to assist you in choosing the most suitable camera module.
Q2. How to start proofing?
A: After confirming all the parameters, we will draw a drawing to confirm the details with you. Once the drawing is confirmed, we will arrange a proofing.
Q3: How do I send the payment?
A: Currently we accept T/T bank transfer and Paypal.
Q4: How long does it take to make a sample?
A: If it is a USB camera module, it usually takes 2-3weeks, if it is a MIPI or DVP camera module, it usually takes 10-15days.
Q5: How long will it take to receive the sample after it is ready?
A: After the samples have been tested and there is no problem, we will send the samples to you via DHL FedEx UPS or any other courier methods, usually within a week.
